Originally posted on this link. Here is how to make cemenite:
Cemenite is an orgone device. A device that produce a type of energy which people call as orgone. It produce orgone by utilizing spesific geometry and material. Correctly made, the type of orgone that cemenite produce is the one that has these kind of effect:
– better sleep, less sleep problem
– more birds chirp around the house
– better gas stove consumption
– plant grow better
– water or food taste better
– vehicle get more mileage and power, may require retuning to get the benefit.
– sky can be clear faster from chemtrail or chemcloud or chemhaze, but rain clouds / fluffy clouds should stay
– fog in the morning
– produce clear ice or ice with vertical air bubble
Here is a pdf file explaining how to make cemenite from network wire.
How to make cemenite from network wire
Indonesian language:
Membuat cemenite dari kabel network
Cemenite must be built exactly like spesified bellow:
Material:
– portland cement
– clean water
– insulated copper wire
No other material or addition allowed, results can be different. If you have to, do proper test, make sure it can produce results mentioned in the above list.
Material requirement:
– the copper wire must be plastic/teflon/PVC insulated. I use UTP network cable, CAT 5E. It contain 8 copper wire with teflon insulation. I use two meter for one cemenite. Equal to 16 meter of single wire. You can also use NYA wire commonly used for home electrical instalation.
– the wire then need to be made into coil. it must use clock wise winding. I use two to four winding for each coil. It is clockwise when going further away from you. I use 3mm coil inner diameter. Here is an illustration for the coil winding direction:
– the winding gap can be tight or sparse but the length of the coil should be 1.3 times the diameter. With 4 mm coil external diameter, the length of the coil should be 5.2mm.
– the cement must be grey cement, also known as Ordinary Portland Cement (OPC). The color must be grey when it is dry. White is not acceptable. This cement usually sold as builder cement, cement for use of mortar application, but don’t use mortar for cemenite.
– try to fill the center of all coil with the cement. Try to prevent air trap.
– every part of the cement must be filled with coil. You must dispose any excessive cement.
– the mold must be cylinder or tubular, cemenite height should be shorter than the diameter. I avoid cone or pyramid shape.
Instruction video:
Make coils from insulated copper wire with rod that has 3mm diameter. Cut it on every few windings. Make about a handfull of them. Make sure to use clockwise winding method. It is clockwise going further from you.
Here is example video:
I now use tight winding gap. This will prevent coils intermixing each other. This will also allow more efficient use of the coils.
Prepare a tubular mold, I found a pie shape produce better results. Preferably from organic material or thin plastic. Also better if the top and bottom has same diameter. I avoid pyramid, cone or rectangular shape. I now use cylinder shape with height half of its diameter.
Mix portland cement and water well. Then you can either directly mix it with coil or pour it few at a time to the mold. Release any trapped bubble in the coil. You can shake or stir it.
Don’t make the cement mix too liquid/thin, make it rather solid/thick/heavy so the coils do not settle down at the bottom.
Dry it well.
I hope this instruction is clear enough to follow. Feel free to ask any question.
Testing:
You can try to freeze water on top of cemenite. Put cemenite in a container and fill it with water, put them inside your freezer. When the water completely freeze, replace with new water. Repeat until at least three times. Then see if the ice will have many vertical air bubble. I get ice like this:
You can also see if the food or drink in your refrigerator change taste during the experiment. It may taste better.
You can also use sleep for testing. Put your cemenite under your pillow or bed and see if you get longer sleep.
For weather, put cemenite in the open area that receive sunlight and rain water.
Cemenite articles:
Cemenite story 1: an unmeasureable physical energy
Cemenite Story 2: Od power
Cemenite Story 3: Relation of Od energy with chemtrails
Cemenite Story 4: Benefit of copper
Cemenite story 5: Reason for helical shape
Cemenite Story 6: How to make cemenite
Cemenite Story 7: Results from cemenite experiments
Debunk climate change & SRM!
Skyquakes, or 'non-earthquake booms' are still a phenomenon in Arizona. TTD first covered the BOOMS…
A company behind a recent controversial effort to cool the earth by use of sulfur…
Just when you thought you've seen it all, you find this on the Governments website.…
NOTE: Facebook restricted this article based on the following: https://leadstories.com/hoax-alert/2021/11/fact-check-ceo-of-pfizer-was-not-arrested-by-fbi-in-scarsdale-ny.html Our story however,…
What are freedoms in America? The five freedoms it protects: speech, religion, press, assembly, and the…
View Comments
i just remember again about my school....
hello.. I am soon to make my first cemenite. I was wondering if the wire, besides being insulated, needs to be one solid copper wire or if it can be stranded copper wire.
Thank you for your work and for sharing it with us.
Hello. Thanks. The wire need to be solid copper. The main reason is to make the coil's shape stay the same during processing. Coils correct geometry / ratio is very important.
Sucahyo lives in the southern hemisphere and has found the best coil winding direction to be clockwise (to me it's the right-hand rule). Question is if I live in the northern hemisphere, do you think it should be a counter-clockwise coil winding (left-hand rule)? I can certainly try both directions with an ice test, but I thought I'd ask first. Thanks!
I send cemenites to texas (which should be in northern hemisphere) few months ago. They use the clockwise winding direction (as in the photo). They still produce the same effect to ice and clouds similar to my place (southern hemisphere).
You can try both, but make only a small cemenite, containing less than 50 coils.
Make sure that the wire is from copper, and use ordinary portland cement without additives, usually it is sold for mortar making purposes.
Thank you Suchayo. I will let you know what happens.
Ok. thanks.
There are two people in US that I know use clockwise cemenite, both produce similar result.
But there are also few people make counter clockwise cemenite but they do not use it for weather (AFAIK). For example youtube of "the old lab rat".
Sucahyo,
I made some coils and did an ice test. The ice next to the coils is clear. There is a cloudy section in the center of the plastic cup, away from the coils. I have 3 great pictures but don't know how to post them here.
Brett
That is a good result. It is a good result if the ice is clear in the coil.
You can upload the image to imageshare or photobucket and post the link here.
What do you mean by the old lab rat?
a youtube channel. Here is his video:
https://www.youtube.com/watch?v=zCT80pi4Dvo
Thank you for not censoring comments just because of different opinions. Geo Watch has been very weird lately and they seem to not go anywhere with their *speakings*
We don't sensor unless you are violent. Or if you are violent to another person on our forums.
Good idea but I seriously doubt it works. You can for sure bet on that if this cemenit stuff works that the government will find a way to *ban* it saying how unsafe it is and the liberals will *pretend* to oppose by wanting a tax on it.
Then the tax will make it so expensive only their rich elite can really afford it on a regular pattern.
It works, Cemenite. Really, you should see the forums on it.
No, many people tried it and provided positive feedbacks. This include the effect on weather too.
The biggest resistance is from people, not from government. Fortunately cemenite is easy to make if anyone willing to try.
We need to use it to allow nature to do her job against the hyper capitalist/communist elite.
Hi, you wrote in PDF, you use about 5 meters of UT cable for 7x5 mold.
If I do coils from that length and put them in empty the mold it fills about 2 cm in the mold.
So we need to prepare more solid cement to prevent coils to settle down at the bottom, and we have to well mix the cement and coils to fill all parts of cement with coils.
Question is - will more long UTP cable increase the power? Or it is waste of cable?
I mean will density of coils increase the power?
For example I noted it's need about 15 meters of cable to fill with coils whole 7x5 mold without cement. So if we add cement the density of coils will be much better then from 5 meters of the cable.
The number is only an estimation. I think your coil do not have gap at all but that is not a problem. The cement should not be excessive. So adjust the amount of cement properly so all part of cemenite is filled with coils. If there is not enough coils, then make more.
It is more important to make sure that:
-the winding direction is correct
-the coils length is 1.3 times the coils diameter
-there is no excessive cement, if the coils is settle down, then remove the excess cement
More coils more power. wrong coils dimension do not increase power but may produce bad energy instead. Every coils must have correct geometry.
Any cemenite should be dense with coils.
ok, thanks for answer.
Greetings - I am in the southern hemisphere - do I still wind the coil in a clockwise direction or would it be better to wind it counterclockwise?
Thank you.
I live in southern hemisphere too, so use clockwise as suggested. If you are not certain, put the coils in water then freeze it. See if the inside part of the coils is transparent even when it outer part is white.
I made several Cemenite, but I did not have the results when I freeze them
You should use spring water or tap water. You can also test it with plant, vehicle or sleep (put at the corner of the sleeping room).
Facebook link is:
https://www.facebook.com/groups/318013238311560/
Someone will help you with this ..................
I have ahard time accepting cemenite has enough power to influence the weather and birds (nature). The clear straight lines in the ice are intriguing, but how do we know this, is not in fact disinfo? I mean after all, cemenite Inventor is basically saying Reiches Orgone devices are hazardous (male energy in excess) - and the only research we get from cemenite, is "clear ice indicates female Orgone energy device". I have more questions too, just trying to figure this out more
There are already many people who build cemenite that also report improved weather and more birds. So that result is replicable. If you have time, try to build cemenite.
People who try to replicate reich still fail. Consider Reich's daughter, Eva Reich statement bellow:
No one seems to be able to achieve that today with Reich device. In fact, the opposite happen, people who use Reich device actually invite thunderstorm and instead of drizzle they cause excessive rain that cause disaster.
Joel Carlinsky claim that he study orgonomy directly from Eva Reich, but even he become silent when I ask if he know how to produce drizzle instead of flood. Right now he try to make an organization that try to control / educate cloud busting operation to prevent people from damaging the weather even more.
https://www.blogger.com/profile/18391891388881605708